MicroPython PyBoard Box
by skgsergio, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This box is made for protection of the MicroPython PyBoard in prototyping. This design is for the PYBv1.0 but the newer versions seems to have the same size although I don't have one to test it.
I've made three versions, one with mounting holes for using with two M2 screws and two without them, of this two one is a simple version and the other have two insertions in the mounting holes.
All of them have the same dimensions and are designed for an easy access to pin headers (or pins) soldered to the board.
This is my first 3D design.
Prusa i3 Hephestos (BQ)
0.2 mm/layer, 1.0 mm top/bottom, 1.2 mm shell
These are the settings of the sample shown in the photo. With 0.1 mm/layer should look pretty nice.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
MicroPython PyBoard Box by skgsergio is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving skgsergio a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure skgsergio would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).