CalcBot Pen Holder
by MBC, published
1
Share
1800
1300
Report Thing as Inappropriate
Description
This is a pen holder designed for a Norland Research Calculator Controlled Robot: smallrobot.com/
It is sized to work with a standard full-size Crayola marker ~14.5mm diameter. There is a bridge between the clamp and the base which acts as a spring hinge to keep pen pressure consistent across bumps and dips.
~15 min print on MakerBot #322
It is sized to work with a standard full-size Crayola marker ~14.5mm diameter. There is a bridge between the clamp and the base which acts as a spring hinge to keep pen pressure consistent across bumps and dips.
~15 min print on MakerBot #322
Recent Comments
view all
Was my first print on my Makerbot, because the GCode file was available. In hindsight it was an excellent object to start with. It shows the intricacy and didn't take too long.
Thankyou MBC
simple but just great on eye impact =-O
1800
1300
Report Thing as Inappropriate
Makes
Tags
License
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
Skein, (or use my gcode)
Print,
Use:
Use it in conjunction with a robot to draw things. Draw shapes on large sheets of paper. Circles are easy
Or use it as a pen holder wherever you need to hold a pen.
Print,
Use:
Use it in conjunction with a robot to draw things. Draw shapes on large sheets of paper. Circles are easy
Or use it as a pen holder wherever you need to hold a pen.
Download All Files
(2 mb zip file)
File Name
Downloads
Size
Comments
You must be logged in to post a comment.
Was my first print on my Makerbot, because the GCode file was available. In hindsight it was an excellent object to start with. It shows the intricacy and didn't take too long.
Thankyou MBC