Bicycle Quick Release Headlight
14
Likes
384
Downloads
481
Views
Published on November 23, 2011
Description
This thing is a quick release bicycle headlight using magnets.
Checkout these video for a demo ...
youtu.be/8rBtbKnmoKw
youtu.be/pFVRycwWcl8
Checkout these video for a demo ...
youtu.be/8rBtbKnmoKw
youtu.be/pFVRycwWcl8
Instructions
Print the parts:
----------------
2 x clip2.stl
1 x magneta.stl
1 x magnetb.stl
Attach one clip2.stl to magneta.stl using a 1/2" 6-32 bolt.
Attach the other clip2.stl to magnetb.stl using a 1/2" 6-32 bolt.
Attach the base to the bicycle handle bar using a 1 1/2" long 6-32 bolt.
Attach the light to the upper part using a 1 1/2" long 6-32 bolt.
Superglue the magnets on the bottom of both magneta.stl and magnetb.stl
Make sure you align the small notches in the right direction for your setup.
----------------
2 x clip2.stl
1 x magneta.stl
1 x magnetb.stl
Attach one clip2.stl to magneta.stl using a 1/2" 6-32 bolt.
Attach the other clip2.stl to magnetb.stl using a 1/2" 6-32 bolt.
Attach the base to the bicycle handle bar using a 1 1/2" long 6-32 bolt.
Attach the light to the upper part using a 1 1/2" long 6-32 bolt.
Superglue the magnets on the bottom of both magneta.stl and magnetb.stl
Make sure you align the small notches in the right direction for your setup.
License
Bicycle Quick Release Headlight by pchretien is licensed under the Attribution - Share Alike - Creative Commons license.
More from pchretien
You must be logged in to post a comment.