Simple bezel for 2-line LCD display
by allartburns, published
1614
468
Report Thing as Inappropriate
Description
This is a simple bezel for the GDM 1602K as sold by Sparkfun with the serial adapter mounted on the rear:
sparkfun.com/commerce/advanced_search_result.php?keywords=gdm+1602k
In my current application I just glue it down, but I'm working on a newer version that can use different mounting styles.
The split version is especially for MakerBot Cupcake users. To get the pieces to line up (and stay together), use some leftover 3mm ABS in the holes and ABS cement to hold it all together.
sparkfun.com/commerce/advanced_search_result.php?keywords=gdm+1602k
In my current application I just glue it down, but I'm working on a newer version that can use different mounting styles.
The split version is especially for MakerBot Cupcake users. To get the pieces to line up (and stay together), use some leftover 3mm ABS in the holes and ABS cement to hold it all together.
1614
468
Report Thing as Inappropriate
Tags
License
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
The single piece is pretty difficult to print on a MakerBot Cupcake without a heated platform, but it can be done if you have your 'Bot properly tweaked.
The split piece prints just fine on my stock Cupcake.
All of these are very slightly oversize to account for ABS shrinkage. If you're using a commercial printer it might print out a wee bit too big.
The split piece prints just fine on my stock Cupcake.
All of these are very slightly oversize to account for ABS shrinkage. If you're using a commercial printer it might print out a wee bit too big.
Download All Files
(798 kb zip file)
Comments
You must be logged in to post a comment.
