Adjustable extruder for Replicator 2
by jeremrem, published
After hours of work I had problem with the new extruder from Makerbot. THe spring was not strong as at the beginning --> PLA was not always taken by the extruder.
So I made an adjustable extruder to solve this problem.
You just need a M4 bolt, a M4 nut and a little spring. All the rest is like "Replicator 2 Drive Block"
Print it without support
Liked ByView All
Give a Shout Out
Adjustable extruder for Replicator 2 by jeremrem is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving jeremrem a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jeremrem would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).