X-Carve Z Cover & Knob
by phraust, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Saw a Z-Axis cover and wanted to adapt a design for a bigger knob and using the press-fit magnets I used on my other covers. I printed it at 0.3mm layer height with PLA, 10% infill. Then just place the magnet, use a c-clamp to pop it in. It's a tighter fit than I thought it would be, but works well.
I printed one thing at a time for best results.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
X-Carve Z Cover & Knob by phraust is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving phraust a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure phraust would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).