Talisman Holder, i.e. Septagon Box and Lid
by OSU_FYE, published
2
Share
1605
856
Report Thing as Inappropriate
Description
Septagon box 20 mm per side, 25 mm deep. Why a septagon? Well, partially because the wikipedia says, "is not constructible with compass and straightedge but it is constructible with a Makerbot." Okay, I added the Makerbot part. Anyway it was fun, and I'm going to store my four leaf clover inside this seven sided box and set it next to the Makerbot during every build -- at least until I learn more about Skeinforge.
Recent Comments
view all
Oops... gotta divide by extrusion thickness... I've been using 0.5... so will use 70 for jitter.
Nice box. I'll make one.
I've been playing with the jitter setting while printing the twisted boxes.
As I interpret it, it's the ratio of start position movement to extrusion thickness... and so the default values are effectively negligible... a value around 20-30 has been sorting the problem out for me with the twisted boxes...
I'm guessing it will wrap - so a value near the perimeter length wont be much good... perhaps 1/4 of the perimeter might be a good bet... 7x20/4=35... I will use this when I print and report back (a few days, hopefully).
1605
856
Report Thing as Inappropriate
Makes
Tags
License
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
* head zeroed at .022 in. above build plate (thickness of construction cardboard).
* Speed settings:
chk,chk,1,1,1.3,26,255,8,1,1,1,55
Might try 22 instead of 26 next time.
* Raft settings:
.55,1.5,1,.375,0,.1,.5,.8,1,.8,.5,2,5,1,1,no,60,2,2,0,0,0,230,230,230,230,220,220.
Next run I'm setting the second raft layer to 230. You can see the first raft layer stayed put using .55, but the second layer lifted a bit.
* jitter=2 still left a line along the side, but I can't find an allowed jitter range.
* Speed settings:
chk,chk,1,1,1.3,26,255,8,1,1,1,55
Might try 22 instead of 26 next time.
* Raft settings:
.55,1.5,1,.375,0,.1,.5,.8,1,.8,.5,2,5,1,1,no,60,2,2,0,0,0,230,230,230,230,220,220.
Next run I'm setting the second raft layer to 230. You can see the first raft layer stayed put using .55, but the second layer lifted a bit.
* jitter=2 still left a line along the side, but I can't find an allowed jitter range.
Download All Files
(46 kb zip file)
File Name
Downloads
Size
Comments
You must be logged in to post a comment.
Nice box. I'll make one.
I've been playing with the jitter setting while printing the twisted boxes.
As I interpret it, it's the ratio of start position movement to extrusion thickness... and so the default values are effectively negligible... a value around 20-30 has been sorting the problem out for me with the twisted boxes...
I'm guessing it will wrap - so a value near the perimeter length wont be much good... perhaps 1/4 of the perimeter might be a good bet... 7x20/4=35... I will use this when I print and report back (a few days, hopefully).
Oops... gotta divide by extrusion thickness... I've been using 0.5... so will use 70 for jitter.