Spaghetti Measure
by RobertHunt, published
1970
621
Report Thing as Inappropriate
Description
A tool for measuring out the correct portion of dried spaghetti for 1-4 people. This is a commonly available kitchen gadget that sells for about £5 in the UK so why not print yourself one and save some money.
This could be made into a laser cut version with a little bit of effort if someone wants to do it, the number of portions could also be etched next to the holes.
The hole sizes were taken from these instructions: freepastatoolsplans.com/Assembly_4.htm
This could be made into a laser cut version with a little bit of effort if someone wants to do it, the number of portions could also be etched next to the holes.
The hole sizes were taken from these instructions: freepastatoolsplans.com/Assembly_4.htm
1970
621
Report Thing as Inappropriate
Tags
License
Spaghetti Measure by RobertHunt is licensed under the Creative Commons - Attribution - Share Alike license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
Print it!
Update: This measures 196mm x 89mm and will not fit in the build volume of the current MakerBot, I though the build volume was larger, I might redesign this for the Makerbot.
Update: This measures 196mm x 89mm and will not fit in the build volume of the current MakerBot, I though the build volume was larger, I might redesign this for the Makerbot.
Spaghetti Measure by RobertHunt is licensed under the Creative Commons - Attribution - Share Alike license.
Download All Files
(54 kb zip file)
Comments
You must be logged in to post a comment.
