YAFSH Spool Holder for Prusa / Mendel / Reprap
by MakerCubed, published
A modified version of the YAFSH (Yet Another Filament Spool Holder) (http://www.thingiverse.com/thing:12974) to fit my Prusa Mendel.
With my print, I didn't even have to tie the clamps (feet) of the holder to the rods. The snug fit seems to hold it pretty well in place.
Also took out a little plastic from the center of the spool hub area to save on some material.
This was a rough mod so please excuse the sloppiness, I didn't have time to make the openscad code all nice and neat, but still wanted to share it.
Also threw in that filament guide I have in the picture, in which you will have to drill a hole because I didn't add it in the files.
Liked ByView All
Give a Shout Out
YAFSH Spool Holder for Prusa / Mendel / Reprap by MakerCubed is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure MakerCubed would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).