Mr. Jaws by Mahoney - Thingiverse

Models Animals

Mr. Jaws

Mahoney

107

Likes

4699

Downloads

14617

Views

Published on December 16, 2011

This thing was Featured on February 25, 2012

Derived from

Mr. Alligator

by curiousmedia

Description

Mr. Jaws is awesome. He is an evolution of Mr. Alligator, so do yourself a favor and print the pair! What could be cooler than having the king of the ocean guard your chips?

Check out the song -- youtube.com/watch?v=kDNlSpKLEEo

Edit: Mr. Jaws v2 has been calibrated to exactly match the scaling of Mr. Alligator. This way when you print the two, Mr. Jaws does not seem so skinny. The original is skinner to permit faster printing.

Instructions

Print and clip. Watch out for your fingers!

Tags

This Thing has no tags.

Report as inappropriate

mondotiki on May 1, 2013 said:

I printed one of these from the test files on the SD that came with my Replicator dual. It turned out great!

brandonh on January 11, 2013 said:

As seen on Glenn Beck?!?: http://www.wired.com/design/20...

toybuilder on February 28, 2012 said:

I just can't get this to skin properly! There are large voids in above the eye (looks a little bit like an eyelid), under the lower teeth, and on the fins that show up on both Mr. Jaws, (scaled .81 to fit my platform), and Mr. Jaws2 (which is smaller). Not identical places on Mr. Jaws and Jaws2, but similar behavior.

It would be interesting to figure out what's causing this to help me dial in my settings...

Mahoney on February 29, 2012 said:

Hey toybuilder!

I think you need to print with 0 shells. Often times when you print with multiple shells Skeinforge does not recognize those small voids and just over looks them. Give that a go and let us know how it turns out!

67restomodder on December 19, 2011 said:

Mr.Jawsv2.stl is in inches. It needs to be scaled by 1/25.4 in x, y, and z to get it into mm.

Mahoney on December 19, 2011 said:

I apologize for that. When I made it I simply imported it into the Mr. Alligator STL and sized it accordingly. I forgot I was on a different machine that started with a different template. I'll update it on the morrow. Thanks!