Endstop Switch
by JeremyBP, published
0
Share
1375
514
Report Thing as Inappropriate
Description
This is my take on MakerBot's Mechanical Endstop. All the traces are on a single layer, and the silkscreen is optional. It is easy to make by hand.
The output pin is normally low, but goes high when the switch is triggered. The resistors are surface mount, but can be soldered easily by hand.
The output pin is normally low, but goes high when the switch is triggered. The resistors are surface mount, but can be soldered easily by hand.
Recent Comments
view all
I've not tried it, but it should if you make a different connector.
I have made this board both with toner transfer and with CNC, it works well with both.
Will this one-sided version work as a replacement for V1.2 (thing:4971) or only for V1.0 ?
1375
514
Report Thing as Inappropriate
Remixed From
Tags
License
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
Coming eventually.
Download All Files
(9 kb zip file)
Comments
You must be logged in to post a comment.
jamesvilleneuve
on
Dec 24, 2009
said:
cool! thanks! btw people you can use the copper toner transfer method to copy the image he created. also are you able to do a gcode file for those of us with cnc?
JeremyBP
on
Jun 14, 2011
said:
I have made this board both with toner transfer and with CNC, it works well with both.
Will this one-sided version work as a replacement for V1.2 (thing:4971) or only for V1.0 ?
I've not tried it, but it should if you make a different connector.