Disposable chopsticks cutting test for iModela
by mah_digilife, published
This is disposable chipsticks cutting test for iModela.
The size of the moai is about 2x5x2mm.
Moai is borrowed from the following model.
"iModela" is the 3D cutting machine manufactured by Roland DG.
This machine can cut the size of 86x55x26mm.
This can move the cutter 0.01mm intervals.
I used a 0.5mm ball cutter and Modela Player 4.
The journey takes less than 30min.
Disposable chopsticks are better off using a good quality.
Poor-quality are holes in places.