Open Beam Corner Bracket
by SLAM-ER, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Remix of Wired1's Open Beam Corner Plate. I removed the inner-most holes and put a stopper in the middle instead.
Ver 0 has the holes in the bottom open, but if this makes it hard to print, ver 1 has the holes close and you will need to drill/push through after printing.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Open Beam Corner Bracket by SLAM-ER is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving SLAM-ER a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure SLAM-ER would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).