Digital designs for real, physical objects. A Universe of Things!

Flash tilt insert for B.I.G. Helios kombi schirmhalter

Created by
serych
Created on Dec 28, 2011

I have bought head for photographic flash umbrella which works fine, but has one big construction error.

The umbrella stake hole in the head is parallel with the flash reflector direction. As the reflector is usually located on the highest place of the flash unit, it is off umbrella axis so the flash is not shining uniformly to the umbrella. The solution is to tilt the flash unit so, that the reflector is shining to the center of umbrella.

So I created semiparametric SDAD file for the tilt insert. I'm using tilt angle of 8 deg for my Nikon SB800 flash (the generated STL file is for that angle), but you can change that parameter to suit your type of the flash. The higher is the position of reflector, the bigger must be the angle.

Downloads

Sort By

Date

Popular

File Type

flash tilt.stl

64 kb / 17 downloads / 5 months ago

flash tilt.scad

509 b / 17 downloads / 5 months ago

They Like It

What's this?

Flash tilt insert for B.I.G. Helios kombi schirmhalter by serych is licensed under the Public Domain license.

© 2011 by serych

Instructions

1) Print the part.
2) Unscrew two little screws on the top of the head (you need star shaped screwdriver)
3) Remove the bar with the aditional light screw
4) Insert the part and fix the screws back

Flash tilt insert for B.I.G. Helios kombi schirmhalter

Downloads

Tags

They Like It

Instructions

Comments

Latest From The Thingiverse Blog

Join Thingiverse®!

Things

Tools

Blog

About Thingiverse®