4mm plywood crate
by siertwijnia, published
3145
857
Report Thing as Inappropriate
Description
This crate is designed by Joris van Tubergen in the ProtoSpace FabLab, Utrecht (Netherlands). We use this crate for storage of a lot of stuff.
The design is made for 4mm plywood, and just fits in the Epilog mini helix 12x24 inch laser.
The design is made for 4mm plywood, and just fits in the Epilog mini helix 12x24 inch laser.
3145
857
Report Thing as Inappropriate
Makes
Tags
License
4mm plywood crate by siertwijnia is licensed under the Creative Commons - Attribution - Non-Commercial license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
You need 4 plywood sheets (4mm), 300x600 mm.
Use the laser settings as mentioned in the file for a Epilog mini helix 35 Watt. Put the parts together by using the tapered pieces.
Use the laser settings as mentioned in the file for a Epilog mini helix 35 Watt. Put the parts together by using the tapered pieces.
4mm plywood crate by siertwijnia is licensed under the Creative Commons - Attribution - Non-Commercial license.
Download All Files
(102 kb zip file)
Comments
You must be logged in to post a comment.
