Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
Shirt hanger on a door...
8
Likes
190
Downloads
190
Views
Published on January 2, 2012
Description
A thing which you can hang off your door... then hang your shirts while you iron!
(This is a work in progress but thought I would throw this up here and then add some derivatives later on)
(This is a work in progress but thought I would throw this up here and then add some derivatives later on)
Instructions
Current STLs are made for 36mm and 45mm thick doors. Print one and slot over the top of your door (I use paper to wedge it if it is a little loose), then hang your shirts off it while you do your laundry!
You must be logged in to post a comment.
Fabricatis
on
January 3, 2012
said:
I've often wanted something like this, albeit for a slightly different purpose... While showering my business shirts decrease nicely just hanging in the steamy bathroom. Unless of course they come into contact with a surface wet with condensation. Your hanger should suit this use case perfectly. Thanks!
License
Shirt hanger on a door... by IainA is licensed under the Attribution - Non-Commercial - Creative Commons license.
More from IainA
Just realised that I had to make one of the STLs for a 45mm thick door... as it is an exterior door (my landlord must be recycling). The apparent standard thickness for an internal door in the UK is 35mm!
maybe 45mm is for fire doors?