Loading

Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!

This Thing may contain NSFW content. Please Log In to view.

Even Tension Foreskin Stretcher

by ThatDrewLion, published

Even Tension Foreskin Stretcher by ThatDrewLion Apr 30, 2016
Share

Thing Apps Enabled

Design Tools

Fusion 360

Use This Project

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Thing Statistics

Views Downloads

Summary

DISCLAIMER

I am no medical professional - this is just me making a thing to pursue a goal. Use this print out at your own risk!!! If something hurts or doesn't feel right STOP USING IT

Summary

Well here it is, my custom foreskin stretching restoration device. I do recommend customizing the models to fit your needs. This is based off the DTR model and the work of http://www.thingiverse.com/Syrus54/

Please review the Post-Printing directions for assembly information.

This is a work in progress please let me know any problems you have and I'll be glad to try and correct them in the source files.

Using the Device

  • Slide the "Sliding Retainer Plate" to the "Push Plate" and set in place with the set-screw. Press it down firmly on the corona and roll the loose skin over the "Sliding Retainer Plate" and secure it under the baby bottle nipple.

  • Attach a rubber band to the top posts of the hollow rod through the loops on the "Sliding Retainer Plate" and back to the other top post of the hollow rod.

  • Carefully unscrew the set-screw and allow the tension from the rubber bands to pull your foreskin slowly stretching it.

Print Settings

Printer Brand:

Robo 3D

Printer:

R1 ABS + PLA Model

Rafts:

No

Supports:

Doesn't Matter

Resolution:

.2mm layers

Infill:

100%


Notes:

I generally print the hollow rod on it's side with supports but everything else can be printed without them. For best results and comfort I recommend coating the two plates (pushing plate and sliding retainer plate) with tool-dip or another type of smoothing agent.

Printed in Black PLA @ 210C Extruder / 75C Bed Temp

Post-Printing

In addition to this print you need

  • Glue (super glue or two part epoxy)
  • M3/.50 nut and M3/.50/12mm screw
  • Baby bottle nipple cut to fit
  • (Optional) Tool Dip

Tool Dip Parts (Optional)

After printing I normally give several cotes of ToolDip to both the "Push Plate" And the "Sliding Retainer Plate." This smooths out the layers and provides a bit of extra comfort but this step is optional.

Complete the Sliding Retainer Plate

  • Add the M3 nut into the Slider plate's receiving hole and glue in place.
  • Carefully stretch the baby bottle nipple over the top and trim away the excess.

Put the parts together

Slide the "Sliding Retainer Plate" onto the "Hollow Rod" and then slide the end of the "Hollow Rod" into the "Push Plate" and glue in place. The Sliding retainer plate should be able to move freely up and down the rod while the "Push Plate" stays fixed.

Use

  • Slide the "Sliding Retainer Plate" to the "Push Plate" and set in place with the set-screw. Press it down firmly on the corona and roll the loose skin over the "Sliding Retainer Plate" and secure it under the baby bottle nipple.

  • Attach a rubber band to the top posts of the hollow rod through the loops on the "Sliding Retainer Plate" and back to the other top post of the hollow rod.

  • Carefully unscrew the set-screw and allow the tension from the rubber bands to pull your foreskin slowly stretching it.

How I Designed This

Initial models were done in tinker-cad - latest revisions come from Autodesk Fusion 360.
Based off the DTR model and the work of http://www.thingiverse.com/Syrus54/

All Apps

Auto-magically prepare your 3D models for 3D printing. A cloud based 3D models Preparing and Healing solution for 3D Printing, MakePrintable provides features for model repairing, wall thickness...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

With 3D Slash, you can edit 3d models like a stonecutter. A unique interface: as fun as a building game! The perfect tool for non-designers and children to create in 3D.

App Info Launch App

Quickly Scale, Mirror or Cut your 3D Models

App Info Launch App

You beat me to it

Top