Attractive bike light mount for cheap LED flashlights.
by yaddatrance, published
This is "yet another" bike light designed to hold the standard "cheap" 24-27mm flashlights. The considerations I used when designing this model was fast printing using minimal material, attractive, strong and printable without rafts or supports.
I don't have any photos as people keep taking them as soon as I'm done making them, but I've printed about a dozen so far.
The strap holes are sized for double-sided velcro, but zip-ties will also work.
It will require 2 - #6-32 nuts and screws. A "standard" #6-32 nut should fit snugly in the recess in the bottom and I used 1/2" screws.
I've also added a second version for the "mini Cree focus flashlights" (and clones)
Liked ByView All
Give a Shout Out
Attractive bike light mount for cheap LED flashlights. by yaddatrance is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving yaddatrance a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure yaddatrance would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).