Drawers
19
Likes
0
Downloads
507
Views
Published on January 8, 2012
Derived from
Parametric compartment box with lid
by acker
Description
This drawers are completely parametric, the stl provided are just an example.
All the structure can be mounted without glue. A special clip is provided to lock the structure, and is quite simple to unlock if needed.
Please Flattr if you find it useful!
All the structure can be mounted without glue. A special clip is provided to lock the structure, and is quite simple to unlock if needed.
Please Flattr if you find it useful!
Instructions
Modify the first part of the scad file. The drawersx-y-z values are the total dimensions, with walls and all.
The values nclipsx-y-z says how many clips you want to put along each axis. My suggestion is to use about 1 clip each 5 cm of the axis.
At the bottom of the scad chose what type of drawers you want. For example drawer(2,2) will build a drawer with 2 horizontal compartments and 2 vertical.
Print multiple clips at a time, being small they will print better and you need them anyway..
No part will need support material.
To make all the stl files in a single shot you can use my tool:
bitbucket.org/hariseldon78/openscad_make_multiple_targets
(git clone git@bitbucket.org:hariseldon78/openscad_make_multiple_targets.git)
or you can comment, compile, uncomment, recomment, recompile etc.. :)
The values nclipsx-y-z says how many clips you want to put along each axis. My suggestion is to use about 1 clip each 5 cm of the axis.
At the bottom of the scad chose what type of drawers you want. For example drawer(2,2) will build a drawer with 2 horizontal compartments and 2 vertical.
Print multiple clips at a time, being small they will print better and you need them anyway..
No part will need support material.
To make all the stl files in a single shot you can use my tool:
bitbucket.org/hariseldon78/openscad_make_multiple_targets
(git clone git@bitbucket.org:hariseldon78/openscad_make_multiple_targets.git)
or you can comment, compile, uncomment, recomment, recompile etc.. :)
You must be logged in to post a comment.
License
More from hariseldon
More from Containers
I love the clip!
also like the whole thing ;)
thanks. If you want to use the clip in another project you just need the last 3 modules in the scad file: clipbb, clip and cliptest.