Spindle holder
by jglauche, published
0
Share
Description
This is a simple spindle holder for my nichrome wire spindle. I designed it in 2d and extruded it with OpenSCAD.
Tags
License
Spindle holder by jglauche is licensed under the Attribution - Non-Commercial - Share Alike license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
Print out 2x side, 1x pipe. I added the DXF and SCAD files if you want to change something.
To hold the pipe in place, you need a M5 square nut and a M5x20 screw on each side.
Maybe add some rubber to it's feet or mount it somewhere so it will not move when you pull the wire.
To hold the pipe in place, you need a M5 square nut and a M5x20 screw on each side.
Maybe add some rubber to it's feet or mount it somewhere so it will not move when you pull the wire.
Spindle holder by jglauche is licensed under the Attribution - Non-Commercial - Share Alike license.
Download All Files
(14 kb zip file)
File Name
Downloads
Size
Comments
You must be logged in to post a comment.
