Loading

BeagleBone Black - Simple Case

by javitooo, published

BeagleBone Black - Simple Case by javitooo Sep 26, 2013

Description


Here you have the design of a simple protecting case for the BeagleBone Black. The side holes gives you access to all the connectors in your BBB with perfect alignment.

There are two versions of this case, both with 2mm walls;
- the one called "JavitoSimpleCase_BBB_v1" which is was my 1st version.
- the one called "JavitoSimpleCase_BBB_v2" where the text of the beaglebone has a diferent font text.

I printed on my CNC-3D printer and slic3r the following parameters:
- Black PLA 1.75mm
- 0.2mm layer height
- 60 % infill
- 3 perimeters
- Support material activated

Enjoy it !!!

Recent Comments

view all
Could u post the results?
I have removed the first file version and upload 2 versions, both with 2mm walls and cover.
The only thing that change is the text font.

Enjoy them !!!!
thanks! I'm printing one today!

More from Electronics

view more

Makes

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

I printed on my CNC-3D printer the following parameters:

- Black PLA 1.75mm
- 0.2mm layer height
- 60 % infill
- 3 perimeters

Good luck with your print!!
I have removed the first file version and upload 2 versions, both with 2mm walls and cover.
The only thing that change is the text font.

Enjoy them !!!!
I love this case! Any chance you could add a top piece with the same design as the bottom?
There you have!

I have added a Verision 2 files for the cover. In the cover there are an extra inner tabs in case that you want to close it with some small screws, you will have to drill the hole.
BR!
thanks! I'm printing one today!
Could u post the results?
Top