Propulsion by propeller
36
Likes
874
Downloads
871
Views
Published on January 10, 2012
Description
This project consists of placing a propulsion system for a robot by means of a DC motor and a propeller.
It consists of three parts:
Propeller of four wings that will be linked to the motor shaft.
Protective casing of the propeller for greater security, together with the support of the motor.
Support that will serve to replace the motor DC and unite the propeller with its case to the robot.
All the measures can be configured so they can adapt to the necessities of each project.
youtube.com/watch?v=9YIwYe39Zu8
It consists of three parts:
Propeller of four wings that will be linked to the motor shaft.
Protective casing of the propeller for greater security, together with the support of the motor.
Support that will serve to replace the motor DC and unite the propeller with its case to the robot.
All the measures can be configured so they can adapt to the necessities of each project.
youtube.com/watch?v=9YIwYe39Zu8
Instructions
To start the motor within the support, paste the protective to the support and paste the propeller a axis motor
You must be logged in to post a comment.
License
Propulsion by propeller by dande is licensed under the Attribution - Share Alike - Creative Commons license.
More from dande
could you make a dragonfly king, recalled btw, it works great just is missing a limiter in the batter for when you leave it to charge on its own. it flys great but cence the blades have been recalled i cant fly it anymore, i would canibalise it but i dont have the knowhow or the equiptment to do it so, to my question, could you design a propeler for this heli or create one that would work in the same way? thnaks if you can and do if not passit on to someone else and see if they can make one that will work with it .
Dragonfly King HX-242 Helicopter
It is difficult, you need lots of power
It is difficult, you need lots of power