XBox Trigger Adapter for The Controller Project contest
by TheBogueRat, published
Breaks out the trigger and buttons from the front of the XBox 360 controller so that they can be used from the top. Design is in response to Caleb Kraft's call for a controller mod that could be used by someone with physical limitations. Check out his good work here: The Controller Project
This might be a good mod for you if you can't bend your trigger fingers.
Any suggestions for improvement are welcome. Assembly video at YouTube
Another mod which brings the control of the trigger/button to one side is here
Print a platter of parts.
Enlarge holes in all pieces except the stand (spacer base) with a 9/64ths drill bit.
Assemble as pictured with a 2 inch #6 pan head machine screw. Tighten just enough that there is slight resistance on the levers.
- Slide onto your wireless XBox 360 controller and secure by pulling the hook-ish side into place.
Liked ByView All
Give a Shout Out
XBox Trigger Adapter for The Controller Project contest by TheBogueRat is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving TheBogueRat a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure TheBogueRat would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).