PingPong Ball Dispenser
9
Likes
213
Downloads
757
Views
Published on January 12, 2012
Description
This is part of the tweet controlled ping pong ball launcher made for the BBC world service radio show "Click"
This is the 5th redesign on the device, as designs that included a hopper were prone to jamming.
A video of it in action: youtube.com/watch?v=iPG-ji3zt7A
ElectricLaboratory.com
This is the 5th redesign on the device, as designs that included a hopper were prone to jamming.
A video of it in action: youtube.com/watch?v=iPG-ji3zt7A
ElectricLaboratory.com
Instructions
Lasercut all parts from 3mm material. (I use mdf)
Use bolts and nuts to make the main section.
Glue the disks to the servos.
Fill a poster tube or similar with ping pong balls and insert into holes.
Plug servos into an arduino or similar and rotate servos to drop pingpong balls through the "air lock"
Use bolts and nuts to make the main section.
Glue the disks to the servos.
Fill a poster tube or similar with ping pong balls and insert into holes.
Plug servos into an arduino or similar and rotate servos to drop pingpong balls through the "air lock"
License
PingPong Ball Dispenser by Solexious is licensed under the Attribution - Share Alike - Creative Commons license.
More from Solexious
You must be logged in to post a comment.