Wii Sensorbar Stand
by Fido, published
0
Share
1340
314
Report Thing as Inappropriate
Description
The Nintendo's gift to the world. A block with leds that you can't live with and can't live without (Metroid 3.. ARGH)
I have a part of ghero drumset in front of sensorbar and it sometimes blocked the line of sight to the sensorbar and it F'd up my gameplay.
There were few times I really wanted to send the 50€ controller combo to the earth orbit through the tv set because of that.
This contraption solved that.
This raises the sensor bar 35-100mm over the possible obsticles (and closer to the tv screen)
(it stays up because of the friction from the clips clamping down to the wiibar)
I have a part of ghero drumset in front of sensorbar and it sometimes blocked the line of sight to the sensorbar and it F'd up my gameplay.
There were few times I really wanted to send the 50€ controller combo to the earth orbit through the tv set because of that.
This contraption solved that.
This raises the sensor bar 35-100mm over the possible obsticles (and closer to the tv screen)
(it stays up because of the friction from the clips clamping down to the wiibar)
1340
314
Report Thing as Inappropriate
Tags
License
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
First, I'm sorry, but this needs some assembly. The legs were too long for the makerbot and had to be cutted.
You'll need:
2x 2x12 bolts and nuts.
M3 bolt+nut or filament piece and a washer(M3).
Some silicone tubing for legs.
Assembly:
Print parts
Clean
Melt of glue the leg parts together.
Use bolts to the clips (or piano wire).
Use M3 bolt or filament to the main pivot point.
Cut approx. 10mm of silicone hose to all the legs for the extra friction.
Filament and washer:
Use soldering iron to infuse the filament to the front leg.
Insert the backleg thru the filament and the washer.
Melt the filament to the washer. (I used this and it works)
--DONE--
You'll need:
2x 2x12 bolts and nuts.
M3 bolt+nut or filament piece and a washer(M3).
Some silicone tubing for legs.
Assembly:
Print parts
Clean
Melt of glue the leg parts together.
Use bolts to the clips (or piano wire).
Use M3 bolt or filament to the main pivot point.
Cut approx. 10mm of silicone hose to all the legs for the extra friction.
Filament and washer:
Use soldering iron to infuse the filament to the front leg.
Insert the backleg thru the filament and the washer.
Melt the filament to the washer. (I used this and it works)
--DONE--
Download All Files
(25 kb zip file)
Comments
You must be logged in to post a comment.
