D3D Scanner - A high-res, open source hardware, structured-light, desktop 3D scanner
by VoxelMetric, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Automated desktop structured-light rig for use with David-Laserscanner SLS software.
Scan volume: 2" cubed - 1' cubed
Scan time: 15 seconds per face
Accuracy: +/- 0.005"
Cost of materials: Under $1,000
You need a sheet metal cutter (plasma or mill) and a brake to bend the pre-cut sheet metal.
We 3D-printed the "Turntable.stl" file on a CubeX.
The circuit diagram, Arduino code and electronic specs are found here... http://www.virtumake.com/forum/viewforum.php?f=8
Thanks Bernhard (aka Virtumake)!
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
D3D Scanner - A high-res, open source hardware, structured-light, desktop 3D scanner by VoxelMetric is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving VoxelMetric a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure VoxelMetric would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).