3D Printed Hexacopter
by wtn, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This Hexacopter is based off of my Quadcopter designs.
(Which are based off of MikeyB's Quadcopter.)
Changes from the previous design include:
- 2 more arms, for a total of 6
- Longer arms,
- Better landing gears
- Overall redesigns for improved usability
The hexacopter was printed on an UltiMax DYI 3D printer because the arms do not fit on many printers, and I needed larger print bed.
Just added V2 files for stronger arms, and better camera mounting. Don't use original arms as the motor mountings could fail.
I have a blog following the development of my project.
My Hexacopter components:
1x DX6i 6-Channel Full Range w/o Servos MD2 SPM6600
6x Afro ESC 30Amp Multi-rotor Motor Speed Controller (SimonK Firmware)
1x Hobby King Octocopter Power Distribution Board(Can be used for Hexacopter)
1x Hobbyking KK2.0 Multi-rotor LCD Flight Control Board
6x Turnigy D2836/9 950KV Brushless Outrunner Motor
1x Turnigy nano-tech 5000mah 3S 25~50C Lipo Pack
1x Turnigy Accucel-6 50W 6A Balancer/Charger w/ accessories
1x Hobbyking 60w Power Supply
1x Turnigy TGY-50090M Metal Gear 9g Analog Servo
3x Turnigy Battery Strap 330mm
1x Slow Fly Electric Prop 1045SF (4 pc)
1x Slow Fly Electric Prop 1045R SF RH Rotation (4pc)
My FPV Components:
(ReadMadeRC Custom 1.3 FPV Starter Package: 1258/1280MHz US Version)
1x 1.3Ghz 400mW Video Transmitter
1x 1.3GHz "Tan" Custom Read Made RC Version with SAW Upgrade Video Reciever
1x Power Cable for Receiver
1x 8dBi Patch Antenna
2x 450mAh 3s batteries
1x Light weight cables ready for transmitter and camera
1x HeadPlay 800 x 600 FPV goggles Combo
1x 690TVL Ultra WDR Pixim SEAWOLF HD CCTV Mini Camera 3.6mm Lens OSD Menu
Edit, personalize, or revise this Thing
3D Printed Hexacopter by wtn is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving wtn a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure wtn would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).