by bre, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a design for two sunglasses. This is my 3rd revision of these glasses.
I lasercut them out 1/8th inch optik acrylic. Then I used a torch to heat up the corners and bend the sides.
I found some craft foam from the craft store and cut out strips to pad the nose section and ear sections.
These have not been tested for UV blocking or shatterproofing, so make these at your own risk.
Flat Glasses by bre is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving bre a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure bre would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).