Split Y-Rod Mount with Integrated Idler for MendelMax
Description
Benefits:
1) Allows you to split the Y-rods
2) Easier to center (just butt up against side rails)
3) Small printer friendly
4) Integrates the Y-idler in double-shear
5) "Hides" the Y-Idler
Cons:
1) Requires a little more hardware
1) Allows you to split the Y-rods
2) Easier to center (just butt up against side rails)
3) Small printer friendly
4) Integrates the Y-idler in double-shear
5) "Hides" the Y-Idler
Cons:
1) Requires a little more hardware
Instructions
1. Print
2. Replace standard mounts
3. Enjoy
If you don't want the idler/belt in this location, just print off 4 of the regular mounts. If you do decide to move your belt to this location, make sure your build plate is rigid in the Z-rotational direction
2. Replace standard mounts
3. Enjoy
If you don't want the idler/belt in this location, just print off 4 of the regular mounts. If you do decide to move your belt to this location, make sure your build plate is rigid in the Z-rotational direction
License
Split Y-Rod Mount with Integrated Idler for MendelMax by Michael521 is licensed under the Creative Commons - GNU GPL license.
More from Michael521
Michael,
When trying to download the stl's it pulls up the gcode instead of downloading the stl.