Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
Ice-scraper (parametric)
7
Likes
1050
Downloads
1021
Views
Published on January 16, 2012
Description
A quick and dirty ice-scraper, for the simple reason that there didn't appear to be one on Thingiverse.
Fully parametric, but currently set to 10cm width with a 10cm handle.
Flagged as Work in Progress, as it has yet to be printed. Feedback is welcomed.
Version 4 now has pointy scourers on the top lip of the scoop, for an easy first scrape.
Version 3 now has the top of the scoop grooved out, as apparently this is excellent for a first scrape - thanks for the tip freakyclown.
Version 2 now released with the following changes:
* Change scoop height to be a factor of handle diameter defaults to 1.5 x handle diameter.
* Removed roundedness from lip, you want sharp edges on the cutting edge.
* Changed scoop_depth parameter to the more logical scoop_length.
Fully parametric, but currently set to 10cm width with a 10cm handle.
Flagged as Work in Progress, as it has yet to be printed. Feedback is welcomed.
Version 4 now has pointy scourers on the top lip of the scoop, for an easy first scrape.
Version 3 now has the top of the scoop grooved out, as apparently this is excellent for a first scrape - thanks for the tip freakyclown.
Version 2 now released with the following changes:
* Change scoop height to be a factor of handle diameter defaults to 1.5 x handle diameter.
* Removed roundedness from lip, you want sharp edges on the cutting edge.
* Changed scoop_depth parameter to the more logical scoop_length.
Instructions
If you want to edit the dimensions, then you will need to install the MCAD libraries (https://github.com/elmom/MCAD), edit the .scad file and compile and re-export the STL.
With either the attached STL, or your newly exported STL, then generate gcodes and send to printer in the usual way.
With either the attached STL, or your newly exported STL, then generate gcodes and send to printer in the usual way.
License
Ice-scraper (parametric) by chrisjrob is licensed under the Attribution - Share Alike - Creative Commons license.
More from chrisjrob
You must be logged in to post a comment.