turbine
by random, published
0
Share
1392
332
Report Thing as Inappropriate
Description
I once wanted to make a wind/water turbine to generate electricity.
but I have no wood/metal-working skills so the project failed.
but since I heard about 3d printers the idea of just printing it came to mind.
so here I designed a turbine in openSCAD.
its probably not that good and I have doubts about the printability and durability .
but I hope somebody has use for it.
but I have no wood/metal-working skills so the project failed.
but since I heard about 3d printers the idea of just printing it came to mind.
so here I designed a turbine in openSCAD.
its probably not that good and I have doubts about the printability and durability .
but I hope somebody has use for it.
1392
332
Report Thing as Inappropriate
Tags
License
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
before it can be printed you need to add a hole for the axis or put a cylinder as axis on it that goes into a bearing.
I haven`t put that on it since I have no idea how big it will print and the measurements of a bearing are not known to me.
after its printed find a source of wind/moving-water.
and mount it up and hook a generator up and hope it doesn`t break.
maybe combine it with one of these:
thingiverse.com/thing:1589
thingiverse.com/thing:802
I haven`t put that on it since I have no idea how big it will print and the measurements of a bearing are not known to me.
after its printed find a source of wind/moving-water.
and mount it up and hook a generator up and hope it doesn`t break.
maybe combine it with one of these:
thingiverse.com/thing:1589
thingiverse.com/thing:802
Download All Files
(29 kb zip file)
Comments
You must be logged in to post a comment.
