Monoprice Select Mini X-Axis Sheet Metal Spacer
by ethanca, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The sheet metal panel shrouding the top, back, and bottom of the X-axis gantry of the Monoprice Select Mini is often loose and can rattle during printing. The root cause of this issue is a severely undersized spacer between the Z-axis block and X-axis sheet metal panel, located just behind the X-axis limit switch. This part replaces that undersized spacer.
It can be installed without any disassembly, but installation is much easier if you remove the front panel of the upper chassis. See disassembly guide here: https://docs.google.com/document/d/1HJaLIcUD4oiIUYu6In7Bxf7WxAOiT3n48RvOe5pvSHk/edit?usp=sharing
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Monoprice Select Mini X-Axis Sheet Metal Spacer by ethanca is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ethanca a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ethanca would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).