resistor box
by raumfahrtagentur, published
2315
425
Report Thing as Inappropriate
Description
designed with E12/24 etc series of resistors in mind (12x2 layout)
flap yet missing, need to figure out a nice way to make the hinge strong and small enough.
can be easily modified by removing seperators/holes for these.
flap yet missing, need to figure out a nice way to make the hinge strong and small enough.
can be easily modified by removing seperators/holes for these.
2315
425
Report Thing as Inappropriate
Tags
License
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
* cut it on a lasercutter from
* 4mm plywood (bottom, sides and middle part (left side in dxf)
* 3mm plywood (11 vertical seperators, right side in dxf)
* glue it together, then clamp it till the glue is set.
* 4mm plywood (bottom, sides and middle part (left side in dxf)
* 3mm plywood (11 vertical seperators, right side in dxf)
* glue it together, then clamp it till the glue is set.
Download All Files
(13 kb zip file)
File Name
Downloads
Size
Comments
You must be logged in to post a comment.
