ordbot rumba mount plus fan
by Seadevil, published
This provides all the mounting holes for the reprapdiscount "rumba" electronics board onto the ordbot hadron handle plate.
Note, I just published version7 (untested) They are intended to address the problems with the prior release (as follows) I have a have a few changes i want to make. I'm using this first version but it needs fixes...
The board mounting posts need to be about 1mm taller. I used some shim washers as a temporary fix. If you don't mind the nut-posts touching the component solder side wires (Don't use those holes) you can live with it as is. or use shim washers like I did.
- The noles in the fan mount are too large. I intended them to self tap with m3 screws, but I ended up using longer screws and nuts to mount the fan to the thing. I also shimmed the 2 holes that hold the thing agains the panel with scrap extrustion string to...
But I haven't gotten around to cleaning them up yet, and have had requests, so here they are as is....
(i just added some shim washers in case you don't have any handy)
Liked ByView All
Give a Shout Out
ordbot rumba mount plus fan by Seadevil is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Seadevil a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Seadevil would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).