Downloads
Sort By
12mm Y rod hol...STEP
113 kb /
35 downloads /
4 months ago
12mm Y rod hold...STL
47 kb /
35 downloads /
4 months ago
LM12UU Bearing...STEP
170 kb /
33 downloads /
4 months ago
LM12UU Bearing ...STL
64 kb /
42 downloads /
4 months ago
They Like It
LM12UU & 12mm Rod Hardware by lasivian is licensed under the Attribution - Non-Commercial - Share Alike license.
© 2012 by lasivian
Instructions
Print, attach, enjoy.
You'll need the following hardware for the rod clamps:
12mm linear or drill rod.
8x 5mm socket-head bolts
8x 5mm nuts
and for the bearing clamps:
LM12uu bearings
4x 5mm Countersunk screws
4x 5mm nuts
4x 5mm Washers
4x Lock Washers (Optional, I used them between the washers and the bolts so that turning the bearing clamp part would not loosen the nut/bolt up.)
NOTE: I printed the rod-end clamps at 1.1 size by accident and they seemed to work well, I did not edit the original file however.