Quanum Trifecta long rear landing gear
by xythobuz, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I've designed my own custom longer rear landing leg to fit my printer (maximum size of 8cm) and still be as long as possible.
As you can see, I like to add a small piece of heat shrink tubing to avoid scratching any surfaces my copter is standing on.
Contrary to what you see in my YouTube video, I recommend printing the part standing upright, not lying with the flat side down. This will increase the strength of the little stow nub.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Quanum Trifecta long rear landing gear by xythobuz is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving xythobuz a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure xythobuz would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).