MOTORIZED screwless heart gears!
by Zh4x0r, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Just modified the bottom gear of the screwless heart gears to fit my old kysan DC extruder motor (which turns very slowly on 5V USB XD)
I'm excited to see other pepole try and print this! If you want the openscad file, let me know!
Print this part,
glue it to a motor of the correct size (37mm diameter 20 mm shaft)
glue the shaft into the center of the heart!
Take a picture of the heart
Upload the picture here after clicking the "I Made One" Link
(the following steps are optional)
Take a video of the rotating heart
Upload to Youtube(or similar free video streaming site)
Post a link in the comments of the picture of your heart that you uploaded after clicking "I Made One"
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
MOTORIZED screwless heart gears! by Zh4x0r is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Zh4x0r a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Zh4x0r would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).