Snoots for Flashguns
by gauravmm, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Models for mounts (on flashguns) and 3d-printed snoots, of varying shapes and sizes.
Base_*.scad for each flashgun you own, and as many different
Snoot_*.scad as you want. Attach 8mm neodymium magnets with superglue to the recesses in each part. Make sure you check alignment before gluing!
See http://www.gauravmanek.com/projects/2014/10/31/snoot.html for more details.
Dimensions are in
dimensions.scad. The size of the mount is
cube([_od_w, _od_h, _od_z]), with
_magnet_t extra width on either side of the y axis.
Solidoodle 2 - Pro
Do your best to minimize warping.
When printing in ABS, I spread an ABS/acetone slurry and allow the acetone to evaporate.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Snoots for Flashguns by gauravmm is licensed under the Creative Commons - Public Domain Dedication license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving gauravmm a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure gauravmm would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).