Bitcoin Bling Necklace
by zhoujianfu, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Do you have 65 BTC in the form of eight 5 BTC and one 25 BTC https://www.casascius.com/ coins?
Do you have a phat gold chain?
Do you want to keep those coins and that chain on your body at all times?
If you answered YES to all three of these questions, then the bitcoin bling necklace is for you!
Just print the stl file (I used glow-in-the dark filament myself)...
but about half-way through, pause your print, and place your 9 coins in (face down), then continue the print. Make sure enough has been printed so that your coins are not sticking up from the plastic so far, or the extruder will scratch them and screw it all up.
Here's a video of mine printing once the coins were in: http://youtu.be/5cxU-26NGlo
Note that the coins are trapped inside the 3D-printed necklace when complete (although it's easy enough to break the plastic and/or peel off the back stickers).
I also included the raw 123dx file if you want to modify the necklace somehow in Autodesk's free 123D Designer software.
Bitcoin Bling Necklace by zhoujianfu is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving zhoujianfu a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure zhoujianfu would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).