by vik, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This seals the end of a piece of "100mmx50mm" (which is a metric approximation) rectangular downpipe, closing the ends for a hydroponic run. It is parametric and can be rescaled to suit larger pipes, or indeed anything with a rounded rectangle profile that needs plugging!
Make sure they fit. Print one for each end. Cut square & clean ends of the pipe. Squirt silicone sealant, epoxy or similar into the groove on the endpiece. Mallet onto the end of the pipe and leave for adhesive to set. If it leaks, dry it and varnish it.
These endpieces were printed in Ivory PLA from Diamond Age Solutions Ltd. on a Simplified Kiwi Mendel.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Hydroponic Endpiece by vik is licensed under the GNU - GPL license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving vik a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure vik would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).