DragonBox 1.0
by chavotronic, published
3167
959
Report Thing as Inappropriate
Description
A box for your AVR Dragon!
3 Files are needed , the right order is : 4mm Part, 6mm, 6mm , 3mm and then once again 4mm.
4mm parts are top and bottom, of course you could use thinner or thicker material.
2 times 6mm material is used for the USB opening. 3mm for the ribbon cable opening.
Use 3mm screws to assemble it.
Enjoy!
3 Files are needed , the right order is : 4mm Part, 6mm, 6mm , 3mm and then once again 4mm.
4mm parts are top and bottom, of course you could use thinner or thicker material.
2 times 6mm material is used for the USB opening. 3mm for the ribbon cable opening.
Use 3mm screws to assemble it.
Enjoy!
3167
959
Report Thing as Inappropriate
Makes
Tags
License
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Download All Files
(33 kb zip file)
Comments
You must be logged in to post a comment.
