Tap Holder Handle
by aubenc, published
I needed (wanted) a longer handle for this thing so i did it.
Just a quick OpenSCAD that slices the skaft.stl in three pieces (bottom, middle and top) and then, it puts them back together changing the length of the middle section to fit the length that has been entered as a parameter.
I tagged this with the "thing-a-day" tag... Oups! I was too late to sign-up so, I guess I shouldn't. I have no problem to remove the tag :-( just let me know
Just click on "I like it" if it is the case. If you don't like it I will not be upset if you click on "I like it" anyway.
Do not print any of the STL!
Wait until tomorrow for a nice (hopefully) change design.
The handle in the pictures has a length of 90mm (add another 30mm for the thread and you get a 120mm tall print)
Liked ByView All
Give a Shout Out
Tap Holder Handle by aubenc is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure aubenc would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).