Fan and led strip mount for printrbot plus v1(version 2)
by lucassiglo21, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
i made a new version of this: http://www.thingiverse.com/thing:158179
the 5mm leds died several times, so i switched to led strips, which are much nicer, the place to mount the led strips is 10mm x 50mm, i used the ones i could easly get, you can, of course, modify everything to your own needs. the fan mount part is the same i used in the last version
This is for M4 screws, the plastic parts are not as forgiving as the lasercut wood when it comes to screw sizes.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Fan and led strip mount for printrbot plus v1(version 2) by lucassiglo21 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving lucassiglo21 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure lucassiglo21 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).