Shower Drain
by bruno, published
0
Share
1218
639
Report Thing as Inappropriate
Description
We needed a shower drain with a height of about 3 cm and a vertical outlet channel which was difficult to find so I decided to print one.
1218
639
Report Thing as Inappropriate
Tags
License
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
Support material is printed inside and must be removed after printing.
Because of the size, wrapping can be an issue (it turned out it was not too bad for me).
I noticed that the top layers (facing upwards) are nicely finished compared to the bottom ones (where you see more loose wires) so it might be an idea to print it with the outlet pipe down (more support material need to be added in that case). It is designed in OpenSCAD, the source file is attached.
Because of the size, wrapping can be an issue (it turned out it was not too bad for me).
I noticed that the top layers (facing upwards) are nicely finished compared to the bottom ones (where you see more loose wires) so it might be an idea to print it with the outlet pipe down (more support material need to be added in that case). It is designed in OpenSCAD, the source file is attached.
Download All Files
(33 kb zip file)
File Name
Downloads
Size
Comments
You must be logged in to post a comment.
