Flat Open Bracelet
by aubenc, published
I'm 48 minutes (my local time) late for my thing-a-day! Finally, here it is.
It's a flat (boring?) oval (can be perfectly circular too) open (of course, you can close it) asimetrical (thinner at the open side) bracelet (or ring if you make it smaller).
This design is intended to be an envelope to be boolean used (intersection) with other textured designs, we'll see...
This one is 60mm x 50mm (inside dimensions) and a little bit more than 29mm tall.
Thickness varies because is asimetrical. It should be a maximum of 3.6mm and a minimum of 2.1mm.
The opening has been set to 20mm, you can change all this, and more, in the OpenSCAD script parameters.
Use it to carve logos, textures, just write something on it or you can also print it as it is.
I've been mercy less with booleans and I go quite crazy with the resolution... it may take time to compile (decreasing the resolution by increasing "res" parameter speeds up the whole thing)
Liked ByView All
Give a Shout Out
Flat Open Bracelet by aubenc is licensed under the Public Domain license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving aubenc a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure aubenc would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).