Printrbot Full Build Tray
Description
This contains all of the base parts for the printrbot in one tiny tray.
(Extruder, Gears & Clamps Sold Separately. ;) )
Full Tray Fits on a 7" x 6" Build Platform!
2 Smaller trays:
Tray 1of2: 4.7" x 4.5"
Tray 2of2: 4" x 4"
I had some trouble squeezing down tray 1 any smaller... Anyone with smaller then a 5" build platform will need to build Tray #1 on their own...
(Tray a #1 contains: 2 Base's, Bearing Guide & X Motor Mount)
(Extruder, Gears & Clamps Sold Separately. ;) )
Full Tray Fits on a 7" x 6" Build Platform!
2 Smaller trays:
Tray 1of2: 4.7" x 4.5"
Tray 2of2: 4" x 4"
I had some trouble squeezing down tray 1 any smaller... Anyone with smaller then a 5" build platform will need to build Tray #1 on their own...
(Tray a #1 contains: 2 Base's, Bearing Guide & X Motor Mount)
Instructions
Print the full tray.
You'll also need these:
2xZ Couplers: thingiverse.com/thing:7153
2xBelt Pulleys: thingiverse.com/thing:16627
*Lots of choices
1xExtruder: thingiverse.com/thing:6713
If you have a smaller build platform... build a bigger printer, then print this tray. Otherwise, use the 'small' stl files. (For smaller then 5"x5" build platform, see Description...)
You'll also need these:
2xZ Couplers: thingiverse.com/thing:7153
2xBelt Pulleys: thingiverse.com/thing:16627
*Lots of choices
1xExtruder: thingiverse.com/thing:6713
If you have a smaller build platform... build a bigger printer, then print this tray. Otherwise, use the 'small' stl files. (For smaller then 5"x5" build platform, see Description...)
You must be logged in to post a comment.
Anonymous
on
March 24, 2012
said:
Which Belt Pulleys do you recommend? Lot's of choices seems about right but i have NO clue which ones to pick :)
tlalexander
on
February 10, 2012
said:
What kind of infill is needed on these parts? Any of them need to be particularly strong?
thejollygrimreaper
on
February 10, 2012
said:
these parts will probably be on ebay in the next two days
beardface
on
February 9, 2012
said:
If someone prints this tray; please post pics. I'm waiting to print it till I get my orange filament. :)
merlinjim
on
February 9, 2012
said:
Can you define tiny? Is this makerbot-able?
beardface
on
February 9, 2012
said:
Sorry, I built this to fit _easily_ on my mendel prusa which has an 8x8 platform.
If you have a ToM, your best option is to do a piece at a time on that tiny thing. ;)
creuzerm
on
February 9, 2012
said:
It appears to be 6" by 7" (I opened the .stl in sketchup saying the source file is in mm).
License
Printrbot Full Build Tray by beardface is licensed under the Attribution - Share Alike - Creative Commons license.
More from beardface
Will you update the parts :-)?
http://www.thingiverse.com/thi...
Btw, what did you use to build the tray?