Pet monster Valentine - Treasure Edition
Derived from
Description
Not everyone who's into dragons likes Valentine's day or "hearts-and-stuff". Because of that I've made a slight variation of my pet monster.
As requested here's a "not so february"-version of the little pet monster Valentine.
Updated information will be posted in the Instructions below.
Best regards,
Andreas
Instructions
No real experience with printing different parts (or printing at all) so I'm not really sure if I'm doing this multiple-parts-stuff right. I'm counting on your feedback. :)
Update 1: Dragon and Chest v1.1
-> Orientation fixed, they fit together now.
-> They shouldn't intersect anymore.
Dragon - Technical details:
-----------------------------
Triangles: 87992
Number of shells:1
Surface area: 30.95cm2
Volume: 4.85cm3
Outbox: 36.6 x 15.6 x 41.6 mm
Chest - Technical details:
-----------------------------
Triangles: 37830
Number of shells: 4
Surface area: 10.66cm2
Volume: 1.48cm3
Outbox: 18.4 x 11.8 x 15.6 mm
Base - Technical details:
-----------------------------
Triangles: 20494
Number of shells:1
Surface area: 48.73cm2
Volume: 12.41cm3
Outbox: 50.0 x 50.0 x 6.8 mm
Dragon & Chest - Technical details:
-----------------------------
Triangles: 96682
Number of shells: 3
Surface area: 39.12cm2
Volume: 6.4cm3
Outbox: 36.6 x 15.5 x 41.6 mm
Please let me know what you think, thanks! :)
You must be logged in to post a comment.
Details for printing a "multi color" print on a single extruder printer:
* Print the chest.
* Print the base.
* Print the dragon with support (for the upper arm)
* You'll need to slightly bend/break the upper arm so the chest can slide in there.
* Glue everything together.
See my note on multiple parts, posted on the original dragon. Add to that, I'm not sure how well the printing tool handles multiple parts that overlap. (Exist in the same space) You would definitely want to clip any overlapping parts. With the heartless dragon, I used a heart to clip the original model, (leaving a heart shaped hole) and then I used that heart as the second piece. Then I had a model that didn't overlap (sort of.) Make sense? People printing them one at a time, can just recenter the chest(or heart) automatically with the printing software.
Thanks for your tips! Do you mean that they shouldn't overlap in general or in this particular case? Because the chest doesn't overlap with the dragon as far as I can tell. I tweaked the dragon model to make room for the chest.
If it does, please let me know where and I'll fix it :)
It's not necessarily that people don't like Valentines Day, it's that we like the dragon so much.
License
More from andreas
More from Sculptures
Thanks for making this little guy he was fun to print and paint up I look foward to more from you in future :)
I'll share more stuff for sure. Right now I'm quite busy with my job so I'm laking some time for that at the moment. I really enjoy seeing your printjobs and the nice coloring you've done on them! Thanks for that :)