Kazoo
77
Likes
1147
Downloads
1618
Views
Published on February 12, 2012
This thing was Featured on February 13, 2012
Description
3D printable kazoo instrument, just add wax paper!
Just print, assemble the parts, add wax paper, and you're ready to hum.
Just print, assemble the parts, add wax paper, and you're ready to hum.
Instructions
For full kazoo in 1 print use the Kazoo_All.STL file & make sure to use exterior support, for the valve to print properly.
Each part is also available in a separate file, only the valve needs support, the cap and body are fine to print without.
To play;
• Insert the valve into the main body
• Cut a small piece of wax paper (about 1" square) & place it on top of the valve
• Gently push the cap over the wax paper and onto the valve
• For best sound, hum into the larger end
• Enjoy!
Object height: 119mm
STP and STL formats available.
Each part is also available in a separate file, only the valve needs support, the cap and body are fine to print without.
To play;
• Insert the valve into the main body
• Cut a small piece of wax paper (about 1" square) & place it on top of the valve
• Gently push the cap over the wax paper and onto the valve
• For best sound, hum into the larger end
• Enjoy!
Object height: 119mm
STP and STL formats available.
You must be logged in to post a comment.
License
Darn, I just bought one... Next one will be printed :-) Thanks for the model.