Tamiya Lunchbox/Midnight Pumpkin 12mm Hex Adaptor
by Xeostar, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is an adaptor to allow you to fit wheels on the back of your Lunchbox or Midnight Pumpkin that have 12mm hex drives.
The standard Lunchbox or Midnight Pumpkin wheels are a very unusual size and fitting type so finding decent tyres or hubs is almost impossible, with these adaptors lots of standard rc car hubs will fit.
Print upside down, with the 12mm Hex at the bottom, this allows for the small protrusion on the other side to be printed. The protrusion is needed to allow the adaptor to transfer axial loads into the out bearing rather than going through the diff gears.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Tamiya Lunchbox/Midnight Pumpkin 12mm Hex Adaptor by Xeostar is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Xeostar a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Xeostar would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).