Dial Indicator Holder
by Benden, published
I was getting tired of using feeler gauges etc to level the TOM stage and picked up a Dial Indicator on eBay
( http://stores.ebay.com/General-Tool-And-Supply-Company ). Then made the dial indicator holder from
Everything works great, makes leveling a breeze. Now, where to stow the Dial Indicator and clip? Solution, design a mount and clip it behind the extruder while not being used, also adds some weight to the Z stage which helps in operation.
Download, and print it!
Add double sided tape to base and place behind extruder stepper motor.
I used 30% fill but I don't think its critical.
Depending upon the tape you use you might need to add an M3 fastener, just drill a hole in the middle if necessary.
Liked ByView All
Give a Shout Out
Dial Indicator Holder by Benden is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Benden would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).